Home->Machine->Polishing Machine->Automatic Polishing Machine type YXPM-01

automatic polishing machine

This machine is for polishing granite and marble slabs. It pre-polish,rough-polish,finish-polish and burnish continuously.
 The polish spindle is controlled for counterpressure by a coaxial cylinder according to the stone character. The operator could choose the required speed of crossbeam and belt by an inverter.
 PC color touch screen controlled and programmed. Slab profile sensing through sensors.Miniimal raise of polish heads at slab exit and lowering at slab entry without variation of the programmed working pressure. Real time visualization of tools state. The control system inspects and optimizes the movement of polish head, crossbeam and belt to expert polishing. This machine can be controlled by telephone network in long range. Fault diagnosis system and production data statistics makes it more humanized.

No. of heads n 16
Useful working width mm 600-2000
Useful working thickness mm 15-50
Belt advancement speed mm/min 0-1600
Spindle motor power kW 11
Total power kW 181
Water consumption m3/h 25
Overall dimensions(L×W×H) mm 12690×2700×2650




Yuxiang is a specialized manufacturer & exporter of automatic polishing machine, marble polishing machine, granite polishing machine, rock polishing machine, stone polishing machine, polish heads, stone grinding machine, polishing plates, polishing pads.

The automatic polishing machine is for polishing granite and marble slabs. It pre-polish, rough-polish, finish-polish and burnish continuously. Marble polishing machine and granite polishing machine has 16 heads. The switchboard on the marble polishing machine, with operation buttons, programmer and liquid crystal display on it, is mounted on the left hand side of the machine. The switchboard make operator easily to control the machine from the sawing area when the stone is being positioned. The polish spindle of automatic polishing machine is controlled for counterpressure by a coaxial cylinder according to the stone character. The operator could choose the required speed of crossbeam and belt by an inverter, when using automatic polishing machine. PC color touch screen controlled and programmed. Slab profile sensing through sensors. Minimal raise of polish heads at slab exit and lowering at slab entry without variation of the programmed working pressure. Real time visualization of tools state. The control system inspects and optimizes the movement of polish head, crossbeam and belt to expert polishing. This automatic polishing machine can be controlled by telephone network in long range. Fault diagnosis system and production data statistics makes it more humanized.